5500 Saint Phillips Road., Evansville, Indiana 47712
Cell: 812-449-0948 EMail: sales@torkking.com

Pneutorque® Standard Series

Models to 3400 N.m, Single Speed

Based on the original Pneutorque, the ‘Standard Series’ Range is a direct result of over 40 years of refinement and development necessary to keep pace with industry’s requirements today.

In use on many thousands of applications worldwide, Pneutorque Wrenches continue to represent the foundation of Norbar’s powered tool range.

  • Models available for almost every bolting application.
  • Forward and reverse operation.
  • Low operator fatigue – quiet, non impacting or pulsing.
  • Repeatability of ±5%.
  • A variety of reaction styles are available for maximum versatility.
  • Electronic torque transducers can be fitted for precise torque monitoring.
Item #ModelSquare DriveFree Speed
1603113/4 in30 rpm
1601111 in30 rpm
160971A1 in15 rpm
1601321 in9 rpm
1601551 in5 rpm
1601761 1/2 in5 rpm

Models to 3400 N.m, Two Speed

Two Speed models offer all of the advantages of single speed versions but with the additional benefit of a run down speed five times greater than the final torque speed.
  • Models available for almost every bolting application.
  • Forward and reverse operation.
  • Low operator fatique – quiet, no impacting or pulsing.
  • Repeatability of ±5%.
  • A variety of reaction styles are available for maximum versatility.
  • Electronic torque transducers can be fitted for precise torque monitoring.
Item #TypeModelSquare DriveFree Speed
16031.MTSManual Two Speed1 MTS3/4 in150 rpm
16011.MTSManual Two Speed1 MTS1 in150 rpm
16097.MTSManual Two Speed1A MTS1 in75 rpm
16013.NTSManual Two Speed2 MTS1 in45 rpm
16015.MTSManual Two Speed5 MTS1 in25 rpm
16017.MTSManual Two Speed6 MTS1 1/2 in25 rpm
16031.AUTAutomatic Two Speed1 AUT3/4 in150 rpm
16011.AUTAutomatic Two Speed1 AUT1 in150 rpm
16097.AUTAutomatic Two Speed1A AUT1 in75 rpm
16013.AUTAutomatic Two Speed2 AUT1 in45 rpm
16015.AUTAutomatic Two Speed5 AUT1 in25 rpm
16017.AUTAutomatic Two Speed6 AUT1 1/2 in25 rpm

Models to 100,000 N.m, Single Speed

  • Models available for almost every bolting application, up to 100,000 N.m.
  • Forward and reverse operation.
  • Low operator fatigue – quiet, no impacting or pulsing.
  • Repeatability of ±5%.
  • A variety of reaction styles are available for maximum versatility.
  • Electronic torque transducers can be fitted for precise torque monitoring.
  • Models 13 and 14 supplied with blank reaction plate for fabrication to specific requirements.
Item #ModelSquare DriveFree Speed
1606671 1/2 in2.5 rpm
1607291 1/2 in1.8 rpm
16046112 1/2 in1.2 rpm
16052132 1/2 in0.3 rpm
16045143 1/2 in0.2 rpm

Models to 100,000 N.m, Two Speed

Two Speed Models offer all of the advantages of single speed versions but with the additional benefit of a run down speed five times greater than the final torque speed.
  • Models available for almost every bolting application, up to 100,000 N.m.
  • Forward and reverse operation.
  • Low operator fatigue – quiet, no impacting or pulsing.
  • Repeatability of ±5%.
  • A variety of reaction styles are available for maximum versatility.
  • Electronic torque transducers can be fitted for precise torque monitoring.
  • Models 13 and 14 supplied with blank reaction plate for fabrication to specific requirements.
Item #TypeModelSquare DriveFree Speed
16066.MTSManual Two Speed7 MTS1 1/2 in12.5 rpm
16072.MTSManual Two Speed9 MTS1 1/2 in9 rpm
16046.MTSManual Two Speed11 MTS2 1/2 in6 rpm
16052.MTSManual Two Speed13 MTS2 1/2 in1.5 rpm
16045.MTSManual Two Speed14 MTS3 1/2 in1 rpm
16066.AUTAutomatic Two Speed7 AUT1 1/2 in12.5 rpm
16072.AUTAutomatic Two Speed9 AUT1 1/2 in9 rpm

Remote Control

All Standard and Small Diameter Series Pneutorques are available fitted with the remote motor.
  • Stall control gives repeatability of ±5% on a given joint.
  • Torque transducers and angle encoders available for all models.
  • These form the basis of sophisticated control systems giving repeatability of up to ±2%.
  • Automatic Two Speed gearbox reduces run-down times.
  • Each gearbox supplied with a standard reaction device or, on request, one specifically designed to suit the application.
Item #ModelSquare DriveFree Speed
16031.X13/4 in30 rpm
16031.XAUT1 AUT3/4 in150 rpm
16011.X11 in30 rpm
16011.XAUT1 AUT1 in150 rpm
16097.X1A1 in15 rpm
16097.XAUT1A AUT1 in75 rpm
6013.X21 in9 rpm
16013.XAUT2 AUT1 in45 rpm
6015.X51 in5 rpm
16015.XAUT5 AUT1 in25 rpm