Hydraulic Wrenches
SU-XL Series Square Drive Ratchet Wrench
A time tested and proven tool design, square drive ratchet wrenches offer a cost efficient
option to handle a wide range of bolting make-up and break-out needs. The SU-XL Series ratchet
wrench employs a "patented design" which increases accuracy and reduces the number of moving parts.
TL T-6 XL body encloses drive train assembly allowing no pinch points and lighter weight. Our
standard SU-XL Series tool capacities range from 100 to 60,000 foot pounds of torque using a 10,000
p.s.i. hydraulic pump.
| Item # | Square Drive | Reaction Area |
|---|---|---|
| SU-1XL | 3/4 in | 3.685 in |
| SU-3XL | 1 in | 5.335 in |
| SU-6XL | 1 1/2 in | 5.460 in |
| SU-11XL | 1 1/2 in | 6.500 in |
| Item # | Square Drive | Reaction Area |
|---|---|---|
| SU-20XL | 2 1/2 in | 7.525 in |
| SU-30XL | 2 1/2 in | 7.525 in |
| SU-45XL | 2 1/2 in | 7.425 in |
| SU-60XL | 2 1/2 in | 8.781 in |
JN-Series Hydraulic Wrench
Our patented JN-Series Hydraulic Wrench is designed specifically for Fast, Safe and Accurate
tightening or loosening of Top Drive Packing Nuts and Gas Compressor Piston Rod Crosshead Jam Nuts.
However, with use of one of our innovative, in-house specialty adapters/inserts, the wrench can be
used to turn any nut that faces the problem of having a shaft, rod or tube running through its
center. The Torq/LiteŽ JN-Series hydraulic wrench features a patented "split-head" design, enabling
the tool to fit over the wash pipe or piston rod and around your packing nut or jam nut. Our
standard JN-Series wrench capacity ranges from 100 to 32,000 foot pounds of torque using a standard
bi-directional 10,000 p.s.i. hydraulic pump.
| Item # | Length | Height | Width | Radial Clearance | Shaft/Rod Clearance | Split-Head Range |
|---|---|---|---|---|---|---|
| JN-10 | 10.659 in | 7.014 in | 1.950 in | 5000 in | 3900 in | 3 1/8 to 4 5/8 in |
| JN-20 | 14.056 in | 9.117 in | 1.950 in | 7372 in | 5000 in | 4 5/8 to 6 in |
| JN-30 | 16.000 in | 10.446 in | 1.950 in | 8825 in | 6750 in | 6 to 8 1/4 in |
IU-XL Series Inline Ratchet Wrenches
Inline ratcheting wrenches require minimum clearance while applying torque on the same plane as
the nut, providing a marked improvement over square drive socket wrenches. Our patented design
breakthrough reduced the overall dimensions of the inline ratcheting head allowing it to fit almost
every application. Our ID-XL Series tool capacities range from 100 to 50,000 foot pounds of torque
using a 10,000 p.s.i. hydraulic pump.
| Item # | Length | Height | Body Width | Head Width | Range |
|---|---|---|---|---|---|
| IU-1XL | 6.250 in | 4.000 in | 1.100 in | .950 in | 3/4 to 2 in |
| IU-3XL | 7.000 in | 5.750 in | 1.450 in | 1.075 in 1.200 in | 1 1/4 to 2 15/16 in |
| IU-7XL | 9.750 in | 6.25 in | 1.500 in | 1.500 in | 2 to 3 7/8 in |
| IU-10XL | 9.250 in | 8.000 in | 1.950 in | 1.950 in | 2 3/8 to 4 1/4 in |
| IU-17XL | 11.250 in | 9.250 in | 1.950 in | 2.450 in | 2 3/4 to 5 3/8 in |
| IU-25XL | 11.250 in | 9.250 in | 2.900 in | 2.950 in | 3 1/2 to 5 3/4 in |
| IU-50XL | 15.375 in | 10.500 in | 2.900 in | 2.950 in | 4 5/8 to 7 1/4 in |